Solar street lights use solar energy as energy, and work outdoors is greatly affected by natural factors. After a long time of use, the battery board is too dusty or covered by snow in winter, the photoelectric conversion rate is reduced, the charging is insufficient, and the battery power is not enough. Therefore, after installing solar street lights, we should regularly organize personnel to conduct all-round and meticulous inspections of the panels, in order to make the panels run in good working conditions for a long time, ensure the normal use of street lights, and create more economic benefits.
Method/step:
1. Check whether the battery board is damaged. It must be discovered and replaced in time.
2. Check whether the connection wire of the battery board and the ground wire are in good contact or not.
3. Check whether the battery board bracket is loose or broken.
4. Check and clean the surrounding and surface of the battery board for coverings.
5. Check the bird droppings on the surface of the battery panel and clean it up if necessary.
In addition to the cleaning and protection of the panels, there are also solutions to the maintenance of the solar cell array:
1. In case of strong wind, heavy rain, hail, heavy snow, etc., measures should be taken to protect the solar cell array to avoid damage.
2. The lighting surface of the solar cell array should always be kept clean. If there is dust or other dirt, it should be rinsed with water first, and then gently wipe the water with a clean gauze. Do not rinse with hard objects or corrosive solvents. , probing.
3. The battery pack matched with the solar cell array should be used in strict accordance with the use and maintenance methods of the battery.
4. Regularly check the wiring of the solar street light electrical system to avoid loose wiring.
Post time: May-27-2022