If the companion of coffee is sugar cube; Then, the companion of the street lamp is the lamp pole. Lamp posts are an indispensable part of street lamps. People always pay attention to how bright the bulbs of street lamps are, but ignore the lamp posts that silently support this light.
Today, with the popularization of high technology, solar street lamps, as green lighting devices, have become more and more popular in cities. So, what should be the standard for solar street lamp poles?
Lamp pole height
Generally speaking, workers need to survey and measure different environments; Then select the lamp pole with different parameters corresponding to the brightness of the LED light source. The lamp pole should be practical, so the parameters of the lamp pole cannot be adjusted at will. Too high and too low parameters are not reasonable. Most of the scenic spots use solar courtyard lamps, and the height of lamp pole parameters is relatively low.
Pole material
For example, the roadside generally adopts steel structure, which has great requirements on the firmness of the lamp pole. But in the scenic area, it only needs a simple light pole, because there will be no car crash and other situations in the scenic area. Such standards are partly rigid requirements of the industry, and partly accumulated by enterprises based on their own years of production experience.
After knowing the standard, let’s see how the lamp pole is made!
1. Cutting
Use plasma cutting to cut the material according to the parameters.
2. Molding
CNC hydraulic bending machine is adopted, with high control accuracy, beautiful lamp pole forming, smooth appearance and one-time forming. The forming part is an important point, which requires the use of numerical control bending machine for operation. Compared with the traditional bending machine, the numerical control bending machine improves the accuracy, speed and other characteristics of the bending machine, and can realize automatic avoidance, direct angle calculation and other operations, which greatly improves the work efficiency. Therefore, numerical control bending machine shall be used to complete the forming step as far as possible.
3. Welding
Adopt numerical control automatic necking machine for welding, the weld is formed at one time, and the surface is uniform.
The above is the manufacturing process of lamp poles. Have you got a new understanding of street lamp poles? Finally, we need to remind that we must make and select lamp poles according to the actual situation of street lamps. Lamp poles with different parameters should be selected for street lamps in different positions, and the highest lighting efficiency should be guaranteed with the minimum cost.
Post time: Jul-01-2022