These preparations need to be done before installing solar street lights

1. Under the condition of ensuring the lighting performance, it is necessary to appropriately increase the distance between solar street light lamps to save the number of lamps, and appropriately increase the height of solar street light poles to improve the lighting effect; as far as possible, place the poles in the middle of the road to save money. Project costs.

2. Fully understand the characteristics of solar street lamps, light sources, and poles, separate investment budgets according to road practice and reference lighting specifications, and rationally select solar lamps, light sources, and poles to fully utilize the high efficiency and energy saving of light sources. The advantages of light distribution and accessory combination.

3. Separate the road project, and intervene in the pole position selection, foundation construction and pre-embedding in time, so as to discover problems in time, make reasonable changes, ensure quality, and save investment.

4. According to the practice and geological conditions of the solar street light project site, design and manufacture the base of the solar street light pole and the base of the high pole lamp to ensure that the foundation is strong and reliable. Special attention should be paid to the fitting of the embedded bolts and the reserved holes of the rod seat, the accurate positioning, the reasonable embedded length and the external length, and the proper maintenance of the thread parts to facilitate positioning when hoisting.

5. In the rock formations and weathered stone areas, it is difficult to reach the request for scattered grounding and segmented grounding. It is possible to consider the full-length connection of galvanized flat steel and other conductors according to the design requirements. The foundation is firmly connected to ensure that each light pole is firmly connected to the dungeon. The high pole lights in solar street lights are scattered, mainly relying on the grounding of the foundation, and if necessary, use resistance reducing agents to reduce the grounding resistance.