The soil conditions of the lamp pole foundation are directly related to the installation position, the size and weight of the lamp pole. These aspects shall be taken into account when designing and manufacturing street lamp poles.
Except for bolts, all fasteners are made of stainless steel, which has long service life and convenient operation. In addition, when tightening the nut, add shims or spring washers. The distance between tightening screws and nuts shall not be less than two pitches.
Revenue and expenditure cable threading pipe shall be reserved for the foundation of street lamp pole. These threading pipes are usually hot-dip galvanized steel pipes, and the reinforcement and degree at the bottom shall be marked to provide foundation and convenience for the construction of road lamp poles in the future.
Lightning rod shall be set at the position of street lamp pole. The length of the needle is generally half a meter. It should be noted that the lightning rod tip cannot be sprayed. Grounding body shall be set around the lamp foundation. There are specific requirements for grounding resistance, grounding receiving length, etc., and construction shall be carried out according to relevant requirements during production and installation. The grounding body shall also be connected with the lamp pole, lamp board and distribution box to form a conductive path.
Post time: Aug-19-2022